wall to glass fixing non-hold 90 degree L type hydraulic hinge

Detail Information

Product Name	wall to glass fixing non-hold 90 degree L type hydraulic hinge
Item Number	EK202.06
Features	Door is self-closed at any position
Hold-open	non-hold
Material	Stainless Steel 304
Surface	Satin Finish/Mirror Finish
Suitable Area	Tempered glass
Glass Thickness	10-15mm glass panel
Door Weight	≤65kg
Door Width	≤1000mm
Door Hight	≤2400mm
Tested According to	EN1154(100.000 cycles)
Sizes Details	112×85×60mm
Weight	N.W:1.1KG,G.W:1.2KG
Remarks	with damping function

Features

1.Glassto glass fixing 90˚

2.Suitablefor 10-15mm tempered glass use

3.Maximumdoor leaf weight: 65kg

4.Maximumdoor leaf width: 1000mm

5.Self-closingat any door open angle

6.Doubleaction, maximum door open angle: 95˚

7.Non-holdconfiguration

8.Valveadjustment available for closing speed control

9.Self-positionedwhen door reaches to initial position

10.Testedaccording to EN1154 (100,000 cycles)

Each pair of Applause Glass Hingeconsists of one damping hinge and one

Closing hinge, only damping hinge isadjustable at closing speed.

To ensure the best performance, DampingHinge should always

Be installed below the Closing Hinge.

Precaution:Be careful not to loosen off the adjustment screw too far as this will renderthe hinge inoperable.

Warranties will also be void if screw isloosened too far.