Which type is better for installation, Base Mount or Core Drill?

If your glass panel project is on a concrete base, you will need to mount your glass using ‘core drill’ spigots. These spigots are fitted into the concrete by drilling a core hole for each one and setting it in place with a structural grout. We recommend Epirez cement-based instant grout which provides final mounting points just as strong as concrete with clean lines for a great look. ‘Base Mount’ spigots are typically used on timber decking and tiled fibre-cement flooring and fixed using the base-plate of the spigot and fixing hardware suitable to your application.

Base Mount spigots can be used on concrete if required, but EKOO recommends the use of core drill spigots since drainage fall is harder to adjust for with Base Mount.